Northeast Interior Specialties

What is LCS?Porcelain enamel steel markerboard, available in 5 colors.What is Vitracite?Porcelain enamel steel chalkboard, available in 9 colors.What is Claridge Cork?¼" self healing burlap backed cork bulletin board, made from pure natural ingredients, in 12 colors.What is Fabricork?Washable vinyl bulletin board, available in 20 colors.What is Hook-Fab?Hook and loop compatible bulletin board, available in 5 colors.What is Designer Fabric?100% polyester bulletin board, available in 12 colors.What is Tan Nucork?¼" fine grain natural cork, without burlap back.Can I get samples of your materials?Yes, click here, for sample request.Can I get a catalog of your products?Yes, click here, for catalog request.Where are your offices and warehouses located?To see addresses of our office locations and coverage maps for each location visit our Contact Page.How long does it take for products to ship?Items that are in stock generally ship within 2-4 days depending on credit approval. Non stock items generally ship in 3-4 weeks. Please note that during the summer these times will be increased due to a large volume of purchases for the next school year.Can I get modified sizes?Our catalogs contain an extensive listing of products and sizes to suit every need, but if you need any modifications to any product, feel free to ask us and we will direct you to someone who can attend to your needs.Can I download CAD drawings to my AutoCad program?Yes, we currently have a library of all drawings which can be saved to your computer and modified by you in AutoCad. To see listing of drawings visit AutoCad Library.How do I clean my markerboards and chalkboards?See our Cleaning Instructions section under Markerboards and Chalkboards.How do I clean my tackboards?See our Cleaning Instructions section under Tackboards.Does Claridge have any kind of electronic or interactive whiteboard or markerboard?Yes, Claridge is pleased to offer eBeam System 3™, the world’s smallest interactive markerboard solution. See our Interactive Markerboards section for more information.

The single source for construction plans and specifications.Search Dodge's comprehensive database for the most profitable projects to fit your business needs.Download plans, specifications and addenda 24 hours a day, seven days a week!Get new and updated projects alerts by e-mail!Take-off software included FREE with Dodge Plans electronic blueprints!Shopping at Dodge Plans is 100% secure!Documents contain materials owned by architects, engineers and others that are protected under US Copyright laws. See terms and conditions for use of Dodge Plans for more information.  

Wall/CeilingMountedTab-Tensioned  Wall/CeilingMountedNon-Tensioned Ceiling-RecessedTab-Tensioned Ceiling-RecessedNon-TensionedArtisan/VPremier**Silhouette/VArtisan/EBaronetParagonRolleramicSalaraSilhouette/ETarga**Access/VAccess MultiView/VAccess Sonata/VSignature/VUltimate Access/VAccess/EAccess MultiView/EAccess Sonata/EAmbassadorEnvoySignature/EUltimate Access/E** Can be ceiling recessed with our optional ceiling trim kit.Check out our Access Dual Roller—a projection screen and window shade in one unit.Tab-Tensioned, Draper's Tab Tensioning System for vinyl surfaces. These screen surfaces consist of a reflective vinyl with no textile backing, and are tensioned for sufficient flatness to perform properly. The surface is stretched flat, resulting in better picture quality.Non-Tensioned, sometimes referred to as free hanging or conventional. The reflective surface is laminated to a woven textile base. The screen surface hangs suitably flat because of the stability of the material and the weight of the bottom dowel.Premier/CSilhouette/C   Artisan/MEvenrollLumaLuma 2Salara/MSilhouette/MStarV ScreenAccess/MApex

2004 Tectum Inc.® TECTUM ACOUSTICAL WALL TREATMENT 04/043-PART SPECIFICATIONSECTION 09840 - ACOUSTICAL WALL TREATMENT (CEMENTITIOUS WOOD FIBER WALL PANELS) PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: Cementitious wood fiber plank acoustical [Wall panel system] [And] [Baffles] and installation accessories. B. Related Sections: 1. Division 9 Sections: Acoustical Suspension. 2. Division 9 Sections: Acoustical Ceilings. 1.2 REFERENCES A. American Society for Testing and Materials (ASTM): 1. ASTM C635 Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings. 2. ASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials. 3. ASTM E1264 Standard Classification for Acoustical Ceiling Products. B. Ceilings and Interior Systems Construction Association (CISCA). 1. CISCA Code of Practices. 1.3 SYSTEM DESCRIPTION A. Performance Requirements: 1. Provide acoustical wall panel assembly designed and tested to provide surface burning characteristics (ASTM E84) as follows: a. Flamespread: [Specify flamespread for product.]. b. Smoke Developed: [Specify smoke developed for product.]. 2. Provide acoustical wall panel system which has been manufactured, fabricated and installed to provide Noise Reduction Coefficient (NRC) rating as follows: a. [Specify required NRC rating from 0.40 - 1.00.]. 1.4 SUBMITTALS A. General: Submit listed submittals in accordance with Conditions of the Contract and Division 1 Submittal Procedures Section. B. Product Data: Submit manufacturer's product data and installation instructions.ACOUSTICAL WALL TREATMENT (CEMENTITIOUS WOOD FIBER WALL PANELS) 098401. Recommended procedures for normal cleaning and removal of stains including precautions in use of cleaning materials that may be detrimental to surfaces. C. Samples: Submit selection and verification samples: [6" x 6" (152 x 152 mm) sample for each wood fiber wall panel unit required, showing full range of exposed texture to be expected in completed work] [and] [One 8" x 10" (203 x 254) sample for each fabric color is available.]. D. Quality Assurance/Control Submittals: Submit the following: 1. Test Reports: Upon request, submit certified test reports from recognized test laboratories. 2. Certificates: Submit manufacturer's certificate that products meet or exceed specified requirements. 1.5 QUALITY ASSURANCE A. Installer Qualifications: Utilize an installer having demonstrated experience on projects of similar size and complexity. B. Regulatory Requirements and Approvals: [Comply with requirements below.] [Specify applicable requirements of regulatory agencies.]. 1. New York City Board of Standards and Appeals: a. Calendar No. L391-52-SM. 2. Corps of Engineers Guide Specification: a. CE-219.01. 3. Southern Building Code Congress International (SBCCI): a. SBCCI Report 9406A. 4. International Conference of Building Officials (ICBO): a. ICBO Research Report No. 1116. 5. Building Officials and Code Administrators International, Inc. (BOCA): a. BOCA Research Report No. 86-39. 6. City of Los Angeles Research Report: a. Report RR25165. 7. State of California: a. DSA Number PA-008. 8. Underwriters' Laboratories of Canada (ULC) label. C. Certifications: [Specify requirement for certifications.]. D. Preinstallation Meetings: [Specify requirements for meeting.].DELIVERY, STORAGE & HANDLING A. General: Comply with Division 1 Product Requirement Section. B. Storage and Protection: Store materials protected from exposure to harmful environmental conditions and at temperature and humidity conditions recommended by the manufacturer. 1. Prevent soiling, physical damage or wetting. 2. Store cartons open at each end to stabilize moisture content and temperature. 1.7 PROJECT/SITE CONDITIONS A. Environmental Requirements: 1. Do not install acoustical panels until building is closed in and HVAC system is operational. 2. Locate materials onsite at least 24 hours before beginning installation to allow materials to reach temperature and moisture content equilibrium. 3. Maintain the following conditions in areas where acoustical materials are to be installed 24 hours before, during and after installation: a. Relative Humidity: 65 - 75%. b. Uniform Temperature: 55 - 70 degrees F (13 - 21 degrees C). 1.8 MAINTENANCE A. Extra Materials: Provide [A recommended percentage of] [Specify percentage.] additional material for use by owner in building maintenance and repair. B. Provide new unopened cartons of extra materials, packaged with protective covering for storage, identified with appropriate labels. PART 2 - PRODUCTS 2.1 ACOUSTICAL [WALL PANEL] [AND] [BAFFLE] SYSTEM A. Manufacturer: Tectum Inc. 1. Contact: 105 South 6th St., Newark, OH 43055; Telephone: (888) 977-9691, (740) 345-9691; Fax: (800) 832-8869; E-mail: info@tectum.com; website: www.tectum.com. B. Proprietary Systems. Acoustical [Wall panel] [And] [Baffle] systems, including the following: 1. Tectum Standard Interior Wall Panels: a. Material: Aspen wood fibers bonded with inorganic hydraulic cement. b. Thickness: [1" (25.4 mm)] [1 1/2" (38 mm)] [2" (51 mm)]. c. Edge: [Long edge beveled] [Tongue-and-groove edges, square ends]. d. Width: [23 3/4" (603 mm)] [31 3/4" (806 mm)] [47 3/4" (1213 mm)]. e. Length: [Specify length from 6' - 12' (1829 - 3658 mm) in 1' (304.8 mm) increments.]. f. Color: [Natural] [Factory painted white] [Factory painted natural] Image finish: [Specify finish from manufacturer's literature.].g. Mounting Style: ["A"] ["C-20"] ["C-40"] ["D-20"]. Provide all fasteners, [Furring strips] and [OCF 703 fiberglass insulation] for a complete single source installation. 2. Tectum Kerfed Wall Panels: a. Material: Aspen wood fibers bonded with inorganic hydraulic cement. b. Thickness: 1" (25.4 mm). c. Width: [23 3/4" (603 mm)]. d. Length: [Specify length up to 12' (3658 mm) in 1' (304.8 mm) increments.]. e. Color: [Natural] [Factory painted white] [Factory painted natural] Image finish: [Specify finish from manufacturer's literature.]. f. Mounting Style: Plastic spline. 3. Tectum V-Line Wall Panels: a. Material: Aspen wood fibers bonded with inorganic hydraulic cement. b. Thickness: [1" (25.4 mm)] [1 1/2" (38 mm)] [2" (51 mm)]. c. Width: [23 3/4" (603 mm)] [31 3/4" (806 mm)] [47 3/4" (1213 mm)]. d. Length: [Specify length from 6' - 12' (1829 - 3658 mm) in 1' (304.8 mm) increments.]. e. Color: [Natural] [Factory painted white] [Factory painted natural] Image finish: [Specify finish from manufacturer's literature.]. 4. Tectum Hanging Baffles: a. Material: Aspen wood fibers bonded with inorganic hydraulic cement. b. Thickness: [1" (25.4 mm)] [1 1/2" (38 mm)] [2" (51 mm)]. c. Size: [11 3/4" (298 mm)] [23 3/4" (603 mm)]. d. Length: 48" (1219 mm). e. Color: [Natural] [Factory painted white] [Factory painted natural] Image finish: [Specify finish from manufacturer's literature.]. 5. Tectum Sound Blocks: a. Material: Aspen wood fibers bonded with inorganic hydraulic cement. b. Thickness: 3" (76 mm). c. Size: 15 1/2" x 15 1/2" (394 x 394 mm). d. Edge: All edges beveled. e. Color: [Natural] [Factory painted white] [Factory painted natural] Image finish: [Specify finish from manufacturer's literature.]. 6. Tectum Fabri-Tough Wall Panels: a. Material: Aspen wood fibers bonded with inorganic hydraulic cement. b. Thickness: 1" (25.4 mm). c. Width: 24" (610 mm). d. Length: 24" - 108" (610 - 2743 mm) in 12" (305 mm) segments. e. Edge: Long edges, fabric wrapped to kerf. f. Fabric Covering: [Specify fabric covering from manufacturer literature or samples.]. g. Mounting Style: ["A"] ["C-20"] ["C-40"] ["D-20"]. Plastic spline. 7. Tectum Fabri-Tough Decor Wall Panels: a. Material: Aspen wood fibers bonded with inorganic hydraulic cement. b. Thickness: [1" (25.4 mm)] [2" (51 mm)]. c. Width: 24" or 48" (610 or 1219 mm). d. Length: [48" (1219 mm)] [72" (1829 mm)] [96" (2438 mm)]. e. Edge: Fabric returned at edges to back. f. Fabric Covering: [Specify fabric covering from manufacturer literature or samples.]. g. Mounting Style: ["A"]. Plastic Z-clip attachment. 8. Tectum Fabri-Glass Wall Panels: a. Material: 6.0 lb density fiberglass core. b. Thickness: 1 inch (25.4 mm). c. Width: 48 inches . d. Length: Various. e. Edge: Long edges, fabric wrapped to kerf. f. Fabric Covering: [ Guilford 701 fabric]. g. Mounting Style: Plastic spline. 9. Tectum Finale Wall Panels: a. Material: Aspen wood fibers bonded with inorganic hydraulic cement. b. Thickness: 1" (25.4 mm). c. Size: [23 3/4" (603 mm)] [47 3/4" (1213 mm)]. d. Color: [Natural] [Factory painted white] [Factory painted natural] Image finish: [Specify finish from manufacturer's literature.]. e. Mounting Style: ["A"] screw attached to suitable substrate. 10. Tectum Finale Fabri-Tough Wall Panels: a. Material: Aspen wood fibers bonded with inorganic hydraulic cement. b. Thickness: 1" (25.4 mm). c. Size: 23 3/4" (603 mm). d. Fabric Covering: [Specify fabric covering from manufacturer literature or samples.]. e. Mounting Style: Plastic spline. 11. Tectum Security Wall System: a. Panel Material: Aspen wood fibers bonded with inorganic hydraulic cement. b. Backing: 25 gauge steel laminated. c. Flamespread: Conforms to ASTM E1264. d. Panel Thickness: [1" (25.4 mm)] [1 1/2" (38 mm)]. e. Panel Width: 24" (610 mm). f. Panel Length: [96" (2438 mm)] [Specify length.]. 2.2 PRODUCT SUBSTITUTIONS A. Substitutions: No substitutions permitted. 2.3 ACCESSORIES A. Provide accessories as follows: 1. Tectum Painted Head Drywall Screws: a. Material: Steel. b. Length: [1 5/8" (41 mm)] [2 1/4" (57 mm)] [3" (76 mm)]. c. Color: [Natural] [White]. 2. Tectum Moulding: a. Material: Plastic. b. Designation: [CHC] [CHH]. 3. Tectum Touch-Up Paint: a. Color: [Natural] [White]. PART 3 - EXECUTION 3.1 MANUFACTURER'S INSTRUCTIONS A. Comply with the instructions and recommendations of the acoustical wall panel system manufacturer. B. Install materials in accordance with governing regulations, fire resistance rating requirements and industry standards applicable to work. 1. Comply with CISCA Code of Practices. 3.2 EXAMINATION A. Site Verification of Conditions: 1. Examine surfaces scheduled to receive suspended or directly attached acoustical units for unevenness, irregularities and dampness that would affect quality and execution of work. 2. Do not proceed with installation of wall panel system until unacceptable conditions are corrected. 3.3 INSTALLATION A. Screw head to be flush with panel surface. B. Securely affix wall panels by means of splines attached vertically to smooth wall or furring strips. Engage vertical kerfs on the edges of the wall panels with splines. Apply adhesive or use Velcro hook and loop fastening where necessary. C. Cover field cut edges by means of trim or other moldings. 3.4 CLEANING A. Clean exposed surfaces of acoustical panel, trim, moldings and suspension members to comply with manufacturer's instructions for cleaning. B. Touch up any minor finish damage. C. Remove and replace work which cannot be successfully cleaned and repaired to permanently eliminate evidence of damage.

Fabric WrappedVinyl WrappedTedlar®Subtle Texture ISubtle Texture IIReflectiveAbsorptiveThickness”Maximum Size* W’xH’Tackability: Good (G) or Excellent (E)Chemically HardenedMetal Edging (Flat Only)Wood EdgingSquareRadius Wall ApplicationsCeiling ApplicationsCore CompositionACOUSTIC PROPERTIESTACKA-BILITYTYPICAL SIZESAVAILABLELOCATION           MAKEUP                 SURFACE FINISHING   EDGE TREATMENTEDGE DETAILINGMOUNTINGTYPICAL APPLICATIONSSTANDARD PANEL TYPESSPECIALTYACTHIGH IMPACTRESISTTACKABLEMIN-TACKMIN-ACTREFLECTIVECUSTOM CURVEDULTIMATE 1000ULTIMATE 1500ULTIMATE 2000QUIET LOUVERREFLECTOR CEILING CLOUDS(HINGED & CURVED)ABSORPTIVECEILING CLOUDSCEILING BAFFLES(TYPE I, II, III)DIFFUSERS(BARREL, PYRAMIDAL)ABSORBER(STANDARD, GEOMETRIX)Z-Clip, adhesive on walls, wire attachment to eyehooks or angle on ceilings.Reflector hardware mounting independently hung.Perforated plastic only.*Limitations on maximum panel size and mountings may exist due to substrate thickness, width of covering or other elements beyond CONWED’s control.Wire attachment to eyehooks or angle.Wire attachment to eyehooks.Z-clip/hook & loop on walls, wire attachment or lay-in.6-7 PCF glass fiber1/2, 3/4, 1, 1-1/2,2, 3, 45/8, 7/8, 1-1/8, 1-5/8, 2-1/8, 3-1/8,4-1/81-1/8, 2-1/87/8, 1, 1-1/8, 1-1/4,1-5/8, 2-1/8, 2-1/41/2, 5/85/8, Nominal 3/41/2, 3/413/16, 1-1/16, 1-9/16, 2-1/1613/16, 1-1/16, 1-9/16, 2-1/167/8, 1-1/8, 1-5/8, 2-1/8, 3-1/8, 4-1/82-1/8, 2-5/161/2, 3/47/8 and up3/4 and upBarrel: 2x2 - 4x8Pyramidal: 2x2 -4x42-1/86PCF resilient glass fiberCork laminated to 6-7PCF Glass FiberHigh-density mineral fiberboard, unperforatedPerforated mineral board6-7 PCF glass fiber, 1/16”or 1/8” 16-20 PCF moldedglass fiber on face & back6 PCF resilient glass fiberfaced with 1/16”perforated plastic6 PCF resilient glass fiberfaced with 1/16”perforated plastic1/8” proprietary highimpact layer on 6 PCFresilient glass fiber6-7 PCF glass fiber withfabric covering  and woodrailsHinged: MDO plywoodCurved: molded fiberglassAct, Impact or moldedcore6-7 PCF glass fiberLaminate glass fiberconstruction, lined orunlined6-7 PCF glass fiber facedwith 1/8” 16-20 PCFmolded glass fiber6-7 PCF glass fiber laminatedwith 1/16” or 1/8” 16-20 PCFmolded glass fiber boardWhere tackability is required but soundabsorption is not, e.g. school roomtackboards, furniture systems.General multi-purpose usage where soundabsorption is required.High traffic areas requiring impact-resistanttackable surfaces with excellent acousticalabsorption.Gymnasiums and multi-purpose rooms:Economical approach to sound absorptionand abuse resistance.Areas where a long-lasting excellent tacksurface is required.Where acoustical absorption and soundblocking is required.Walls and ceilings requiring strong designelements combined with acousticalabsorption.Areas requiring extreme impact resistance,sound absorption and a wipable surface.Areas requiring extreme impact resistanceand fabric facing.Gymnasiums or areas needing impactresistance and excellent tackability.Churches, hotels, schools and receptionareas requiring the beauty of wood, as well asacoustical absorption.Theaters and auditoriums needing tunablereflection to enhance sound quality in aperformance environment.Ceilings requiring strong design elementscombined with acoustical absorption.A tasteful large-area acoustical solution with ahigh degree of design flexibility.Enhances performance quality in musiclistening environments.Commonly used with Diffusers for a precisioncombination of sound absorption, reflectionand diffusion. Conwed Designscape benefits customers worldwide with a heritage of excellence that spans more than 75 years. From acoustical insulation for Lindbergh's Spirit of St. Louis to the first freestanding acoustical office dividers, Conwed is known for innovative customized solutions. Today, Conwed Designscape is a recognized leader in the design and manufacture of acoustical interior wall and ceiling products and office systems that meet the ever-changing needs of companies, architects, builders, and space planners in almost every commercial, industrial and institutional industry.Service is a core competencyConwed Designscape consistently delivers exceptional service. From prompt and knowledgeable answers, quotations and recommendations to detailed acoustical evaluations and on-time delivery of proven solutions, our experienced staff is committed to service excellence. Conwed's service is further enhanced by a nationwide distribution and sales network to effectively and quickly respond to customer needs.Conwed Designscape800 Gustafson RoadLadysmith, Wisconsin 54848North America Toll-Free: 1-800-932-2383North America Toll-Free FAX: 1-800-833-4798Local and international Tel: 1-715-532-5548Local and international FAX: 1-715-532-5410

GENERAL1.01 DESCRIPTION OF WORKA. Section Includes: 1. Porcelain enamel chalkboards 2. Porcelain enamel markerboards 3. Porcelain enamel Marker Walls 4. Tackboards 5. Tack Walls 6. Field-Assembled Trim 7. Vertical and Horizontal Sliding UnitsB. Related Sections Include: 1. 10410 Directory and Bulletin Boards 2. 11106 Display Equipment 3. 12350 Display Casework1.02 REFERENCED STANDARDSA. American Society for Testing Materials 1. ASTM-E 84 Standard Test Method for Surface Burning Characteristics for Building Materials 2. ASTM B221Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wires, Profiles and Tubes.1.03 SUBMITTALSA. Shop Drawings: Provide shop drawings for each type of visual display board required.B. Product Data: Provide technical data for materials specified. Include Material Safety Data Sheets, when applicable.C. Samples and color charts: Provide Manufacturer's color charts and composition samples of face, core, backing and trim to illustrate finish, color and texture, where required.D. Manufacturer’s Instructions: Provide Manufacturer’s installation instructions. 1.04 QUALITY ASSURANCEA. Provide all items in this section as manufactured by: Claridge Products and Equipment, Inc., Harrison, Arkansas 72602-0910, Phone: 870/743-2200 Fax: 870/743-1908B. Regulatory Requirements: Conform to applicable code for flame/smoke rating in tackboards in accordance with ASTM-E 84.C. Operation and Maintenance: Include data on regular cleaning, stain removal, and precautions.1.05 PROJECT CONDITIONSA. Field measure prior to preparation of shop drawings and fabrication to ensure proper fit.B. Comply with manufacturer’s recommendations for climatizing area for interior moisture and temperature to approximate normal occupied conditions.1.06 DELIVERY, STORAGE AND HANDLINGA. Ordering: Comply with manufacturer's ordering instructions and lead time requirements to avoid construction delay.B. Delivery: Deliver materials in original, unopened, undamaged containers with identification labels intact.C. Storage and Protection: Store materials protected from exposure to harmful weather conditions and at temperature and humidity conditions recommended by manufacturer. 1.07 WARRANTYA. Submit a "Life of the Building" warranty, stating that under normal usage and maintenance, and when installed in accordance with manufacturer's instructions and recommendations, Claridge porcelain enamel steel Vitracite chalkboards and LCS markerboards are guaranteed for the life of the building. Guarantee covers replacement of defective boards but does not include cost of removal or reinstallation.B. Submit a standard warranty, stating when installed in accordance with manufacturer’s instructions and recommendations, Claridge tackboards are guaranteed for one year against defects in materials and workmanship. Guarantee does not cover normal wear and tear, improper handling, any misuse, or any defects caused by vandalism or subsequent abuse. Guarantee covers replacement of defective material but does not include cost of removal or reinstallation. C. Writing Surface Warranty Period: (Specify term) ____ years commencing on Date of Substantial Completion.PART 2 - PRODUCTS2.01 MANUFACTURERSA. Visual Display Board Manufacturer: Claridge Products and Equipment, Inc. 1. Contact: P. O. Box 910, Harrison, AR 72602; Telephone: (870) 743-2200; Fax: (870) 743-1908; E-Mail: claridge@claridgeproducts.com; web site: www.claridgeproducts.com.2.02 MATERIALSA. Claridge Porcelain Enamel Chalkboards and Markerboards: Porcelain enamel Vitracite chalkboards and LCS markerboards shall be manufactured in accordance with Porcelain Enamel Institute’s specification. Porcelain enamel finish shall be fusion bonded to a 24 gauge steel substrate at temperature necessary to reduce steel and porcelain stresses and achieve superior enamel bond and hardness. 1. Claridge Unframed Porcelain Enamel Chalkboards and Markerboards a. Face Sheet: (Specify 24 gauge Vitracite Chalkboard; or 24 gauge LCS Markerboard). b. Core Material: (Specify 1/4” Hardboard; 7/16” MDF; 7/16” Duracore; 3/8” Duracore; 3/8” Particle Board). c. Panel Backing: (Specify Moisture barrier back; 0.002” Aluminum Foil Panel; 0.005” Aluminum Foil Panel; 0.015” Aluminum Sheet Panel; Steel Panel). d. Laminations: Shall be hot-type neoprene contact adhesive applied to both surfaces automatically. Each substrate shall have a minimum of 80% covering with 1.5-2.0 dry mils of adhesive. Panel components shall have uniform pressure applied mechanically over entire area. Laminations shall be made by face sheet manufacturer. e. Size: (Specify size or As indicated on Drawings.). f. Color: (Specify face sheet color from manufacturer’s standard colors.) 2. Claridge Factory-Built Chalkboards and Markerboards: a. Face Sheet: (Specify 24 gauge Vitracite Chalkboard; or 24 gauge LCS Markerboard). b. Core Material: (Specify 7/16” MDF; 7/16” Duracore; 3/8” Duracore; 3/8” Particle Board). c. Panel Backing: (Specify Moisture barrier back; 0.002” Aluminum Foil Panel; 0.005” Aluminum Foil Panel; 0.015” Aluminum Sheet Panel; Steel Panel). d. Series: (Specify Series 1, 3, 4, 5, or 185.). e. Typical Arrangement: (Specify Type A, Type C, Type D, Type F, Type H, Type BR, reverse BL, Type ER, reverse EL, or Type GR, reverse GL.). f. Panel Size: (Specify writing surface panel length and height, and, for combination units, tackboard panel length and height. Standard length up to 16’0”.). g. Panel Color: (Specify color(s) from manufacturer’s standard colors.). Color charts furnished on request. 3. Claridge Porcelain Enamel Marker Walls a. Architect to specify 24 gauge Porcelain Enamel Steel Skins with matched butt joints or 24 gauge Porcelain Enamel laminated panels with matched butt joints and steel splines. 1. LCS24 - 24 gauge Porcelain Enamel Steel Skins 2. LCS24-217-M - 24 gauge Porcelain Enamel Steel Skins mounted on 7/16” MDF core with moisture barrier backing.B. Tackboards 1. Claridge Unframed Tackboards a. Claridge Cork: Composed of 1/4” thick self-healing, burlap backed cork laminated to a 1/4” hardboard backing. b. Fabricork: Vinyl fabric on cork underlay with 1/4” hardboard back. c. Hook-Fab: Hook and loop compatible fabric on cork underlay with 1/4” hardboard back. d. Designer Fabric: Fabric on cork underlay with 1/4” hardboard back. e. Tan Nucork: Composed of pure grain natural cork on 1/4” hardboard back. 2. Claridge Factory Built Tackboards: a. Tackboard Surface: (Specify Claridge Cork: 1/4” thick cork laminated to a 1/4” hardboard backing; Fabricork: Vinyl fabric on cork underlay with 1/4” hardboard back or Vinyl fabric on duracore; Hook-Fab: Hook and loop compatible fabric on cork underlay with 1/4” hardboard back; Designer Fabric: Fabric on cork underlay with 1/4” hardboard back; or Tan Nucork: 1/4” natural cork on 1/4” hardboard back.) b. Series: (Specify Series 1, 3, 4, 5, or 185.). c. Typical Arrangement: (Specify Type CO, Type C, Type D, Type F, Type H, Type BR, reverse BL, Type ER, reverse EL, or Type GR, reverse GL.). d. Panel Size: (Specify tackboard panel length and height, and, for combination units, writing surface panel length and height. Standard length up to 16’0”.). e. Panel Color: (Specify color(s) from manufacturer’s standard colors.). Color charts furnished on request. 3. Claridge Tack Walls a. Architect to specify edge-wrapped panels of Fabricork (1380AEW) or Designer Fabric (3104EW) butted together, or panels of Fabricork (1380A) or Designer Fabric (3104) installed with fabric-covered trim. 1. 1380AEW Fabricork - vinyl fabric on duracore backing with edges wrapped 2. 1380A Fabricork - vinyl fabric on duracore backing 3. 3104EW Designer Fabric - fabric on duracore backing with edges wrapped 4. 3104 Designer Fabric - fabric on duracore backingC. Claridge Extruded Aluminum Trim with Satin Anodize Finish and Accessories 1. Factory-Built Trim: a. Series: (Specify Series 1, 3, 4, 5, or 185.). 2. Field-Assembled Trim: a. Screw-On Aluminum Trim b. Slip-On Aluminum Trim c. Snap-On Aluminum Trim d. Marker Wall Trim 1. 1016 Trim with 1015 Ground e. Fabric Covered Tack Wall Trim 1. 1016-FC Fabric Covered Trim with 1015 Ground 2. 697-FC and 698-FC Fabric Covered Outside and Fabric Covered Inside Corner Trim f. Length: (Specify length.). g. Finish: (Specify finish - Satin Anodize standard.). 1. Optional finish - Color Anodized Trim 2. Optional finish - Powder Coat Paint Finished Trim 3. Chalktrough a. Standard continuous, solid type aluminum tray with ribbed section and injection molded end closures. b. Standard continuous, hollow aluminum tray with injection molded end closures; cast aluminum end closures optional. 4. Map Rail a. Standard continuous 1” map rail with cork insert and end stops at the top of each chalkboard or markerboard. b. Standard continuous 2” map rail with cork insert and end stops at the top of each chalkboard or markerboard. 5. Accessories a. Map Hooks: (One map hook furnished for every two feet of Map Rail on Factory-Built Units.). b. Roller Brackets: (Specify number required.). c. Flag Holders: (Specify number required.).D. Claridge Modular Markerboard, Chalkboard and Tackboard Units: 1. Typical Arrangement: (Specify MOD1, MOD2 or MOD3) 2. Writing Surface: (Specify 24 gauge Vitracite chalkboard or 24 gauge LCS markerboard.). 3. Tackboard Surface: (Specify Claridge Cork, Fabricork, Hook-Fab, Designer Fabric or Tan Nucork.). 4. Panel Size: (Specify writing surface panel length and height and/or tackboard panel length and height. 4’0” x 8’0” maximum). 5. Wall Standards: Specify single or double aluminum wall standards. Standards to be fastened directly to wall on 4-foot centers. 6. Panel Color: (Specify color(s) from manufacturer’s standard colors.).E. Claridge Factory-Built Wood Framed Markerboard, Chalkboard and Tackboard Units: 1. Series: (Specify series from manufacturer’s standard units.) 2. Typical Arrangements: (Specify arrangement from manufacturer’s standards.). 3. Panel Size: (Specify panel length and height. Sizes up to 4’0” x 12’0”.). 4. Panel Color: (Specify color from manufacturer’s standard colors.). 5. Wood Frame: (Specify type of wood and finish from manufacturer’s standards.).F. Claridge Horizontal Sliding Markerboard, Chalkboard and Tackboard Units: 1. Series: (Specify series from manufacturer’s standard units - two-track; three-track; four-track; or component parts.) a. Sliding Panels and/or Back Panel - Writing surface: 24 gauge steel (Specify 24 gauge steel LCS Markerboard or 24 gauge steel Vitracite Chalkboard) b. Sliding Panels and/or Back Panel - Tackable surface: (Specify Claridge Cork, cork laminated to burlap backing; Fabricork, vinyl fabric on cork underlay; Designer Fabric, fabric on cork underlay; Hook-Fab, hook and loop compatible fabric on cork underlay; or Tan Nucork, natural cork) 2. Sizes: (Specify panel length and height. Standard height - 4 feet. Standard length is up to 24 feet) 3. Typical Arrangements: (Specify type and color of back panel, if required, and number, type and color of sliding panels. Select from manufacturer’s standards.) 4. Component Parts: (Specify top mounted panels without housing or bottom mounted panels without housing.)G. Claridge Vertical Sliding Markerboard, Chalkboard and Tackboard Units: 1. Series: (Specify series from manufacturer’s standard units - manually or motor operated, Wall or Floor Mounted Vertical Sliding Units) a. Sliding Panels and/or Back Panel - Writing Surface: 24 gauge steel (Specify 24 gauge steel LCS Markerboard or 24 gauge steel Vitracite Chalkboard) b. Sliding Panels and/or Back Panel - Tackable Surface: (Specify Claridge Cork, cork laminated to burlap backing; Fabricork, vinyl fabric on cork underlay; Designer Fabric, fabric on cork underlay; Hook-Fab, hook and loop compatible fabric on cork underlay; or Tan Nucork, natural cork) c. Wall Mounted Units: Panels slide from sill or chalktray to top of unit. d. Floor Mounted Units: Panels slide from floor to top of unit. (Optional kick panel allows sliding panels to be concealed when in down position, leaving entire rear wall surface as writing or tackable surface.) e. Sizes: (Specify panel length and height. Standard height is 8 feet for wall mounted verticals and 10 feet for floor mounted verticals. Standard length is up to 16 feet) f. Sliding Panel(s) and Housing: Specify number of sliding panels required, one, two or three) 1. Sliding panels are 7/8" thick 2. Housing has 4" wide face a. Housing for units with one sliding panel is approximately 3-5/16" deep b. Housing for units with two sliding panels is approximately 6-1/2" deep c. Housing for units with three sliding panels is approximately 9-9/16" deep 2. Series: (Specify series from manufacturer’s standard units - Wall or Floor Mounted Thinline Vertical Sliding Units.) a. Sliding Panels and/or Back Panel: 24 gauge steel (Specify 24 gauge steel LCS Markerboard or 24 gauge steel Vitracite Chalkboard) b. Sliding Panels and/or Back Panel: (Specify Claridge Cork, cork laminated to burlap backing; Fabricork, vinyl fabric on cork underlay; Designer Fabric, fabric on cork underlay; Hook-Fab, hook and loop compatible fabric on cork underlay; or Tan Nucork, natural cork, tackable sliding panel(s) or back panel) c. Wall Mounted Units: Panels slide from sill or chalktray to top of unit. d. Floor Mounted Units: Panels slide from floor to top of unit. (Optional kick panel allows sliding panels to be concealed when in down position, leaving entire rear wall surface as writing or tackable surface.) e. Sizes: (Specify panel length and height. Standard height is 8 feet for wall mounted Thinline verticals and 10 feet for floor mounted Thinline verticals. Standard length is up to 12 feet) f. Sliding Panel(s) and Housing: Specify number of sliding panels required, one, two or three) 1. Sliding panels are 1/2" thick 2. Housing has 2-5/8" wide face a. Housing for units with one sliding panel is approximately 2-23/32" deep b. Housing for units with two sliding panels is approximately 4-7/8" deep c. Housing for units with three sliding panels is approximately 7" deep 3. Typical Arrangements: (Specify type and color of back panel, if required, and number, type and color of sliding panels. Select from manufacturer’s standards.)2.03 FABRICATIONA. Shop assembly: (Specify factory assembled or field assembled chalkboard, markerboard, and tackboard units).B. Shop assembly: Provide Horizontal Sliding Units with all corners reinforced with angles to strengthen frame. Nylon ball bearing rollers at top of unit and nylon guide rollers at bottom of unit to be of sufficient size and number to eliminate vibration and provide smooth and quiet operation of the panels. 1. LCS Markerboard: a. Sliding Panels: 1. Face Sheet: 24 gauge steel 2. Core: 3/8” honeycomb 3. Backing: steel b. Back Panels: 1. Face Sheet: 24 gauge steel 2. Core: 3/8” particle board 3. Backing: Moisture Barrier Back 2. Vitracite Chalkboard: a. Sliding Panels: 1. Face Sheet: 24 gauge steel 2. Core: 3/8” honeycomb 3. Backing: steel b. Back Panels: 1. Face Sheet: 24 gauge steel 2. Core: 3/8” particle board 3. Backing: Moisture Barrier Back 3. Claridge Cork Tackboard Sliding Panels and/or Back Panel: a. Face Sheet: 1/4” cork b. Binder: burlap c. Backing: hardboardC. Shop assembly: Provide Vertical Sliding Units with all corners reinforced with angles to strengthen unit and eliminate vibration. Panels to be equipped with ball bearing rollers for elimination of side motion and noise plus, ball bearing neoprene end rollers for effortless movement of panels. Sliding panels to be counterbalanced and all cables rotate around one central pulley to eliminate racking. Vertical sliding units to be completely assembled at the factory and erected on a test panel before shipping. All sections to be properly fitted and all units to be thoroughly tested, then taken apart for shipping. Components are to be clearly marked for easy reassembly on the job. 1. LCS Markerboard: a. Sliding Panels: 1. Face Sheet: 24 gauge steel 2. Core: 3/4” honeycomb 3. Backing: steel b. Back Panel: 1. Face Sheet: 24 gauge steel 2. Core: 3/8” particle board 3. Backing: Moisture Barrier Back 2. Vitracite Chalkboard: a. Sliding Panels: 1. Face Sheet: 24 gauge steel 2. Core: 3/4” honeycomb 3. Backing: steel b. Back Panel: 1. Face Sheet: 24 gauge steel 2. Core: 3/8” particle board 3. Backing: Moisture Barrier Back 3. Claridge Cork Tackboard: a. Sliding Panels: 1. Face Sheet: 1/4” cork 2. Binder: burlap 3. Backing: honeycomb and steel b. Back Panel: 1. Face Sheet: 1/4” cork 2. Binder: burlap 3. Backing: hardboardD. Shop assembly: Provide Thinline Vertical Sliding Units with all corners reinforced with angles to strengthen unit and eliminate vibration. Panels to be equipped with nylon guides for effortless panel movement. Sliding panels to be counterbalanced and all cables rotate around one central pulley to eliminate racking. Thinline Vertical Sliding Units to be completely assembled at the factory and erected on a test panel before shipping. All sections to be properly fitted and all units to be thoroughly tested, then taken apart for shipping. All components are to be clearly marked for easy reassembly on the job. 1. LCS Markerboard: a. Sliding Panels: 1. Face Sheet: 24 gauge steel 2. Core: 3/8” honeycomb 3. Backing: steel b. Back Panels: 1. Face Sheet: 24 gauge steel 2. Core: 3/8” particle board 3. Backing: Moisture Barrier Back 2. Vitracite Chalkboard: a. Sliding Panels: 1. Face Sheet: 24 gauge steel 2. Core: 3/8” honeycomb 3. Backing: steel b. Back Panels: 1. Face Sheet: 24 gauge steel 2. Core: 3/8” particle board 3. Backing: Moisture Barrier Back 3. Claridge Cork Tackboard Sliding Panels and/or Back Panel: a. Face Sheet: 1/4” cork b. Binder: burlap c. Backing: hardboardPART 3 - EXECUTION3.01 PROJECT CONDITIONSA. Verify before installation that interior moisture and temperature approximate normal occupied conditions.B. Verify that wall surfaces are prepared and ready to receive boards.3.02 INSTALLATIONA. Deliver factory built units completely assembled and of dimensions shown in details and in accordance with manufacturer’s shop drawings as approved by the architect.B. Follow manufacturer’s instructions for storage and handling of units before installation.C. Install level and plumb, keeping perimeter trim straight in accordance with manufacturer’s recommendations. 3.03 ADJUST AND CLEANA. Verify that all accessories are installed as required for each unit.B. At completion of work, clean surfaces and trim in accordance with manufacturer’s recommendations, leaving all materials ready for use.
1.2 RELATED SECTIONS Specifier Notes: Edit the following list of related sections as required for the project. List other sections with work directly related to the lockers. A. Section 03300 (03 30 00) – Cast-in-Place Concrete: Concrete bases. B. Section 06100 (06 10 00) – Rough Carpentry: Wood ground and furring for anchoring lockers. C. Section 09650 (09 65 13.13) – Resilient Base. 1.3 REFERENCES Specifier Notes: List standards referenced in this section, complete with designations and titles. This article does not require compliance with standards, but is merely a listing of those used. A. ASTM A 653 – Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process. B. ASTM A 1008 – Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability. 1.4 SUBMITTALS A. Comply with Section 01330 (01 33 00) – Submittal Procedures. B. Product Data: Submit manufacturer's product data and installation instructions. Specifier Notes: Delete locker benches from the following paragraph if they are not specified. C. Shop Drawings: Submit manufacturer's shop drawings, indicating construction, materials, dimensions, door frames, doors, handles, locks, ventilation, options, accessories, [locker benches,] finish, locker layout, anchoring, and installation details. D. Samples: Submit manufacturer's standard color samples. E. Warranty: Submit manufacturer's standard warranty. 1.5 QUALITY ASSURANCE Specifier Notes: Describe requirements for a meeting to coordinate the installation of the lockers and to sequence related work. Delete the following paragraph if not required. A. Pre-installation Meeting: Convene pre-installation meeting [2 weeks] [ __________ ] before start of installation of lockers. Require attendance of parties directly affecting work of this section, including Contractor, Architect, installer, and manufacturer's representative. Review installation, adjusting, cleaning, protection, and coordination with other work. 1.6 DELIVERY, STORAGE, AND HANDLING A. Delivery: Deliver materials to site in manufacturer's original, unopened containers and packaging, with labels clearly identifying product name and manufacturer. B. Storage: Store materials in clean, dry area indoors in accordance with manufacturer's instructions. C. Handling: Protect materials and finish during handling and installation to prevent damage. PART 2 PRODUCTS 2.1 MANUFACTURER A. Lyon Workspace Products, PO Box 671, Aurora, Illinois 60507. Toll Free (800) 323-0082. Phone (630) 892-8941. Fax (800) 367-6681. Web Site www.lyonworkspace.com. E-Mail lyon@lyonworkspace.com. 2.2 STANDARD STEEL LOCKERS A. Model: Standard Quiet Lockers. Specifier Notes: Specify style of lockers. Multiple-tier lockers are four, five, and six-tiers high. B. Style: [Single tier] [Double tier] [Triple tier] [Four tier] [Five tier] [Six tier] [As indicated on the Drawings]. Specifier Notes: Specify size of lockers per opening. C. Locker Size: [ _______ inches wide by _______ inches deep by _______ inches high per opening] [As indicated on the Drawings]. Specifier Notes: Specify configuration of lockers. D. Locker Configuration: [Single row] [Double row] [As indicated on the Drawings]. Specifier Notes: Specify knocked-down or fully assembled construction. Knocked-down construction is standard. E. Construction: [Knocked down] [Fully assembled]. Specifier Notes: ASTM A 1008 steel is standard. Specify ASTM A 653 galvannealed steel for high humidity or corrosive atmospheres. F. Material: 1. Steel: [ASTM A 1008, Class I, mild-annealed, cold-rolled steel, free from surface imperfections] [ASTM A 653, galvannealed steel]. 2. Bolts: Zinc plated or other comparable rust-retardant treatment. G. Body: 1. 24-gauge steel. 2. Flanged to give double thickness of metal at back vertical corners. H. Door Frame: 1. 16-gauge formed-steel channels. 2. Vertical Members: Additional flange to form continuous door strike. 3. Corners: Lapped and welded into rigid assembly. 4. Bottom Cross Members: Tang at each end that fits through slot in rear flange of upright frame member to prevent twisting out of alignment. 5. Top and Bottom Cross Members: Provide support for front edge of locker top and bottom. I. Doors: Specifier Notes: Specify gauge of doors. 16-gauge is standard. 1. 1-piece, [16-gauge] [14-gauge] steel. 2. Single, Double, and Triple-Tier Locker Doors: Both vertical edges formed into channel-shaped formation. Top and bottom flanged at 90-degree angle. 3. Multiple-Tier Locker Doors: Hinge side formed into channel-shaped formation with other 3 sides flanged at 90-degree angle. 4. Multiple-Tier Locker Doors, Up to and Including 15 Inches Wide by 15 Inches High: 18-gauge steel, unless otherwise indicated. J. Ventilation: 1. Single-Tier Lockers: a. 9 Inches Wide: Six 3-1/2-inch louvers top and bottom. b. Over 9 Inches Wide: Six 6-inch louvers top and bottom. 2. Double-Tier Lockers: a. 9 Inches Wide: Six 3-1/2-inch louvers top and bottom. b. Over 9 Inches Wide: Six 6-inch louvers top and bottom. 3. Triple-Tier Lockers: a. 9 Inches Wide: Two 3-1/2-inch louvers top and bottom. b. Over 9 Inches Wide: Two 6-inch louvers top and bottom. 4. Multiple-Tier Lockers: a. 12 Inches and 15 Inches Wide: Three 3-1/2-inch louvers per door. b. 18 Inches Wide and Over: Four 6-inch louvers per door. Specifier Notes: The following four sentences specify optional louver arrangements. Delete if not required. If any of the optional louver arrangements are specified, delete the appropriate sentence above. 5. Single-Tier Lockers: [No louvers] [Fully louvered] [Mini louvers]. 6. Double-Tier Lockers: [No louvers] [Fully louvered] [Mini louvers]. 7. Triple-Tier Lockers: [No louvers] [Fully louvered] [Mini louvers]. 8. Multiple-Tier Lockers: [No louvers] [Fully louvered] [Mini louvers]. Specifier Notes: The following two sentences specify optional diamond-shaped perforations instead of louvers. Delete if not required. Perforated sides, backs, tops, bottoms, and intermediate bottoms are also available. Consult Lyon for additional information. If the optional diamond-shaped perforations are specified, delete the appropriate sentences above. 9. Single, Double, and Triple-Tier Lockers: 2 groups of diamond-shaped perforations for each door. 10. Multiple-Tier Lockers: 1 group of diamond-shaped perforations for each door. K. Hinges: 1. Height: Minimum of 2 inches. 2. Type: 0.050-inch thick steel, 5-knuckle, full-loop hinge forming double thickness on each leaf. 3. Attachment: Set hinges in slot in door and frame and projection welded to frame and securely attached to door. 4. Hinge Pin: Spun over at ends to resist removal. 5. Single-Tier Lockers, 48 Inches and Higher: 3 hinges. 6. All Other Tiers: 2 hinges. 7. Mounting: Right-hand side of door. L. Multi-Point Locking Device: 1. Single-Tier Lockers, 48 Inches and Higher, Locking Device: Engage frame at 3 points. 2. Double and Triple-Tier Locking Device: Engage frame at 2 points. 3. Channel-Shaped Locking Device: a. Full-length reinforcing ribs. b. Quiet design using nylon-guide inserts to reduce metal-to-metal contact. c. Zinc-alloy latch finger with nano roller at point of contact with door jamb. 4. Lock Bar: Enclosed on 3 sides and operate within channel formation of door. 5. Locking Device: Prelocking so mechanism can be locked in open position. Door locking automatically when closed. 6. Door Jambs: a. Single-Tier Lockers, 48 Inches and Higher: 3 door jambs. b. Double and Triple-Tier Lockers: 2 jambs welded to side of door frames to engage locking device. c. Safety Reverse Nose for Each Jamb: Eliminate hazard of sharp-pointed edges protruding into locker. d. Easily replaceable soft rubber bumper for each jamb. 7. Multiple-Tier Lockers: 14-gauge steel lock clip for attaching padlock. Specifier Notes: Single-point latches replace the multi-point locking device and are optional. Delete if not required. They are not available on 9-inch wide lockers. Delete the above sentences if single-point latch is specified. 8. Single-point latch. 9. Doors: Provided with lock hole filler to permit use of built-in key or combination lock. M. Handles: Specifier Notes: Specify tamper-guard handles, recessed handles, or single-point latching system for single, double, and triple-tier lockers. Tamper-guard handles are standard. Used with built-in key locks, combination locks, or coin-deposit lockers. For use with multi-point locking device only. 1. Tamper-Guard Handles: a. Single, double, and triple-tier lockers. b. Chrome-plated, die-cast zinc alloy, with minimum tensile strength of 40,000 psi. c. No moving parts shall operate against outside surface of locker. d. Padlock Attachment: Integral part of lift, attached directly to locking bar and protected by fixed-handle housing. e. Built-in padlock strike. Specifier Notes: Recessed handles are optional on single, double, and triple-tier lockers and 2-person lockers. Used with built-in key locks, combination locks, or coin-deposit lockers. For use with multi-point locking device only. Delete if not required. 2. Recessed Handles: a. Single, double, and triple-tier lockers and 2-person lockers. b. 4-1/8 inches wide by 6-1/16 inches high by 1-1/4 inches deep. c. Light-grain, nickel-plated, die-cast zinc alloy, with minimum tensile strength of 40,000 psi. d. Flush-front appearance. e. Finger lift activates door lock. Specifier Notes: Single-point latching system is optional on single, double, triple, and multiple-tier lockers. Not available on 9-inch wide lockers. Delete if not required. 3. Single-Point Latching System: a. Single, double, triple, and multiple-tier lockers. b. 4-1/8 inches wide by 6-1/16 inches high by 1-1/4 inches deep. c. Light-grain, nickel-plated, die-cast zinc alloy, with minimum tensile strength of 40,000 psi. d. Flush-front appearance. e. Operates with no moving parts. f. Pan reinforcements, 18 gauge. Specifier Notes: Specify door pulls for multiple-tier lockers. Roll-point catch is optional. 4. Door Pulls: a. Multiple-tier lockers. b. 16-gauge steel door pull with padlock attachment, when not used with built-in locks. c. Roll-point catch. N. Shelves: 1. Single-tier lockers. 2. 1 shelf, approximately 9 inches below top. 3. Single sheet, 24-gauge steel. 4. Flanged on 4 sides. 5. Safety Front Flange: Double flanged with second bend turned 45 degrees. 6. Attachment: Minimum of 2 points through each side flange. O. Coat Hooks: 1. Single, double, and triple-tier lockers. 2. 1 double-prong ceiling hook and 3 single-prong wall hooks. 3. Steel rod stock with ball points for snag-free use. 4. Attachment: 2 bolts. 5. Finish: Zinc-plated or comparable rust-retardant treatment. P. Coat Rods: 1. Use in 18-inch and deeper, knocked-down, single-tier lockers, replacing double-prong ceiling hook. 2. 5/8-inch diameter, galvanized steel. 3. Attachment: Bracket with 2 bolts at each end. Specifier Notes: Include the following paragraph if free-standing lockers are required. Front and end closed bases are optional. Q. Free-Standing Lockers: 1. 6-inch legs. 2. Front and end closed bases. 2.3 ACCESSORIES Specifier Notes: Specify accessories required and delete the others. Consult Lyon for assistance in specifying accessories for the specific application. A. Extra Shelves: 1. Single sheet, 24-gauge steel. 2. Flanged on 4 sides. 3. Safety Front Flange: Double flanged with second bend turned 45 degrees. 4. Attachment: Minimum of 2 points through each side flange. Specifier Notes: Number plates are optional. Delete if not required. B. Number Plates: 1. Aluminum. 2. Size: 2-3/4 inches wide by 1 inch high. 3. Numbers: Clearly etched numbers a minimum of 3/8 inch high. 4. Attachment: Attach in prepunched holes near top of doors. Specifier Notes: Specify type of locks. Lock options can be used with standard locker handle and retrofitted to existing installations. Consult Lyon for assistance in specifying locks for the specific application. C. Locks: [Built-in combination] [Built-in key control] [Combination padlock] [Key control padlock] [Safe-O-Mat] [None]. Specifier Notes: Specify tops of lockers. Delete tops not required. Continuous-sloping hoods mount on one or more standard flat-top lockers. Individual-sloping tops are furnished on lockers with full-height side panels and backs. D. Tops: [Flat] [Continuous-sloping hoods] [Individual-sloping tops]. Specifier Notes: Specify optional material for bottom of lockers. Delete if not required. E. Bottoms: [Painted steel, 16 gauge] [Painted galvannealed steel, 24 gauge] [Painted galvannealed steel, 16 gauge] [Unpainted stainless steel, 16 gauge] [Beige-colored plastic]. Specifier Notes: Specify bases. Delete bases not required. F. Bases: [Kitchen cabinet style, 4 inches high, for no-leg lockers] [Closed style, fit in 6-inch high spaces between legs, for 6-inch leg lockers] [Z-type, 12-gauge steel, 4 inches high, for no-leg lockers] [None]. G. Floor Anchoring: Anchor lockers to floor in accordance with manufacturer's instructions. H. Closures and Fillers: 1. Top closures, closure strips, front expansion fillers, and corner fillers. 2. Fill spaces between 2 lockers or between lockers and walls as required for proper fit. I. End Panels: 1. End Cover Panels: 14-gauge steel, construction bolt heads exposed at perimeter. 2. End Finishing Panels: 16-gauge steel, no bolt heads exposed. J. Recess Trim: 1. End and Top Recess Trim for Lockers to be Placed in Wall Recesses: 18-gauge formed steel with 2-3/4-inch wide face. Bolted to locker frames. 2. Top Recess Trim: Approximately 5'-0" lengths with formed splice cap to cover joints and to hold top recess trim in alignment. 3. End Recess Trim: 2-3/4 inches higher than lockers and lap over ends of top recess trim for neat joint at top of corners. Specifier Notes: Delete the following article if locker benches are not required. 2.4 LOCKER BENCHES Specifier Notes: Specify laminated hardwood, plastic laminate, or anodized aluminum locker benches. Consult Lyon for assistance in specifying locker benches for the specific application. A. Laminated Hardwood Benches: 1. Top: Laminated hardwood with clear coat finish. Specifier Notes: Specify length of top. Length ranges from 3 to 12 feet in 1-foot increments. a. Size: 9-1/2 inches wide by 1-1/4 inches thick by _______ feet long. b. Finish: Acrylic, 2 coats. Specifier Notes: Specify pedestals. Enameled steel is standard. 2. Pedestals: [14-gauge enameled steel with 1-5/8-inch tubing uprights] [Heavy-duty enameled cast iron] [Anodized aluminum extrusion, Type 6105-T5, 2 pieces, 2-1/4 inches by 3/4 inch, formed and unit welded]. Specifier Notes: Pedestal finish is for enameled steel and cast iron. a. Finish: Same color as lockers. B. Plastic Laminate Benches: 1. Top: [Color matched] [Wood laminated]. a. Core: Laminated hardwood. b. Long Sides: Full 180-degree soft edge. Specifier Notes: Specify length of top. Length ranges from 3 to 12 feet in 1-foot increments. c. Size: 12 inches wide by 1-3/4 inches thick by _______ feet long. Specifier Notes: Specify pedestals. Enameled steel is standard. 2. Pedestals: [14-gauge enameled steel with 1-5/8-inch tubing uprights] [Heavy-duty enameled cast iron]. a. Finish: Same color as lockers. C. Anodized Aluminum Benches: Specifier Notes: Specify bench type. 1. Type: [Portable] [Fixed-position]. Specifier Notes: Specify length of top. Length ranges from 3 to 12 feet in 1-foot increments. 2. Top: 9-1/2 inches wide by _______ feet long. 3. Pedestals: Anodized aluminum extrusion, Type 6105-T5, 2 pieces, 2-1/4 inches by 3/4 inch, formed and unit welded. 4. Base: 12-5/8 inches wide by 14-5/8 inches high. D. Pedestals: 1. Spacing: Maximum of 6-foot centers. 2. Overall Height: 17-3/4 inches. 3. Attachment: Attach to top with 2 lag screws. Anchor to floor with 4 suitable anchors. 2.5 FINISH A. General: Factory apply finish in accordance with manufacturer's instructions. B. Standard Finish: Exposed steel parts shall be thoroughly cleaned, given bonding and rust-inhibitive phosphate treatment, and electrostatically sprayed with heavy coat of enamel. Baked-on finish. Specifier Notes: An optional high-gloss finish is available on all Lyon premier colors. Delete if not required. Consult Lyon for additional information. C. High-Gloss Finish: Apply high-gloss finish. Specifier Notes: An optional clear-coat finish is available. It is not available over powder-coat finish. Delete if not required. Consult Lyon for additional information. D. Clear-Coat Finish: Apply 1 coat of clear polyester over color coat. Specifier Notes: An optional corrosion-resistant finish is available. Delete if not required. Consult Lyon for additional information. Lyon recommends application of a corrosion-resistant finish or galvannealed steel on lockers used in high humidity or corrosive atmospheres. Consult Lyon for finish compatibility with specific chemicals. E. Corrosion-Resistant Finish: 1. Surface Preparation: Clean and treat locker components with multi-step detergent/iron phosphate coating, rinse with cold water, and seal with non-chrome treatment. 2. Primer: Apply prime coat of modified epoxy through electrostatically charged dip process. 3. Finish Coat: Apply finish top coat of high-solids polyester paint over primer through electrostatically charged spray process. Specifier Notes: An optional antimicrobial finish is available on all Lyon LifeStyle™ lockers. Delete if not required. Consult Lyon for additional information. F. Antimicrobial Finish: Apply antimicrobial finish. G. Color: Specifier Notes: Specify exterior color from Lyon standard color chart or by matching special color. Consult Lyon for availability of two-tone effects and custom colors. 1. Exterior Color: _______________ . Specifier Notes: Specify interior color. 2. Interior Color: [Dove Gray] [Putty] [Match exterior color] [ _______________ ]. PART 3 EXECUTION 3.1 EXAMINATION A. Examine areas to receive lockers. Notify Architect if areas are not acceptable. Do not begin installation until unacceptable conditions have been corrected. 3.2 INSTALLATION A. Install lockers in accordance with manufacturer's instructions at locations indicated on the Drawings. B. Install lockers plumb, level, square, rigid, with flush installation. C. Use manufacturer's supplied hardware. Specifier Notes: Lyon strongly recommends all lockers be floor and/or wall anchored to prevent tipping or injury. D. Anchoring: Anchor lockers to floors and walls as indicated on the Drawings. E. Sloping Hoods and Metal Fillers: Install sloping hoods and metal fillers using concealed fasteners. F. Joints: Provide flush hairline joints against adjacent surfaces. G. Number Plates: Attach number plates to face of doors level with 2 aluminum rivets. Attach in sequence as indicated on the Drawings. Specifier Notes: Delete the following sentence if locker benches are not specified. H. Locker Benches: Install locker benches by fastening bench tops to pedestals and securely anchoring to floor using appropriate anchors. I. Repair minor damages to finish in accordance with manufacturer's instructions and as approved by Architect. J. Remove and replace defective or damaged components that cannot be successfully repaired as determined by Architect. 3.3 ADJUSTING A. Adjust doors, locks, and operating hardware to function properly and for smooth operation without binding. 3.4 CLEANING A. Clean surfaces promptly after installation in accordance with manufacturer's instructions. B. Do not use harsh cleaning materials or methods that could damage finish. 3.5 PROTECTION A. Protect installed lockers from damage during construction. A. Lockers shall be as manufactured by one of the following manufacturers:1. DeBourgh Manufacturing Co., Minneapolis, MN2. List Industries, Boca Raton, FL3. Medart, Inc., Greenwood, MS4. Penco Products, Oaks, PA5. Republic Steel Corp., Canton, OH6. Or approved equal.REPUBLIC "QUIET" LOCKER SPECIFICATIONS SECTION 10500 - METAL LOCKERS PART 1- GENERAL 1.1 RELATED DOCUMENTS: We suggest use of your standard office reference to drawings, general and special conditions, etc. 1.2 SCOPE: Furnish and install new steel lockers, accessories and finish metal trim as shown or indicated on drawings. Concrete or masonry bases, wood furring, blocking or trim as may be required by drawings are included in other sections of this specification. 1.2.1 SUBMITTALS: Shop Drawings: Submit drawings showing locker types, sizes, quantities, including all necessary details relating to anchoring, trim installation and relationship to adjacent surfaces. Numbering: The locker numbering sequence will be provided by the approving authority and noted on approved drawings returned to the locker contractor. Color Charts: Provide color charts showing manufacturer's available colors. Request samples of paint on metal if required by normal office procedures or in the event of non-standard color selection. Lock Combination Listings and Master Keys: Use only when combination locks are specified. Delivered directly to the owner's representative. 1.3 QUALITY ASSURANCE: 1.3.1 UNIFORMITY: Provide each type of metal locker as produced by a single manufacturer, including necessary installation accessories, fittings and fasteners. 1.3.2 JOB CONDITIONS: Do not deliver metal lockers until building is enclosed and ready for locker installation. Protect from damage during delivery, handling, storage and installation. PART 2- PRODUCTS 2.1 MANUFACTURER: Republic Storage Systems Company, Inc. Products by other manufacturers may be approved provided they meet the detailed specifications written below. Approval procedure shall be as specified in the General Conditions of these locker specifications. 2.2 LOCKERS: (fill in as specified) Corridor Locker Style: Quiet Configuration (Tier): Size: Color: No. of Locker Frames: No. of Locker Openings: 2.3 FABRICATION 2.3.1 MATERIAL: All major steel parts shall be made of mild cold rolled steel, free from imperfections and capable of taking a high grade enamel finish. -Alternate: Specified locker components shall be manufactured from Galvannealed steel and finished by manufacturer's standard process. 2.3.2 FINISH: Surfaces of the steel shall be thoroughly cleaned and phosphatized in a seven-stage process. All parts shall then be finished with a heavy coat of enamel baked on at 300 degrees for 30 minutes. 2.3.3 CONSTRUCTION: Lockers shall be built on the unit principle-each locker shall have an individual door and frame, an individual top, bottom, back and shelves with common intermediate uprights separating units. 2.3.4 DOOR FRAMES: Shall be 16 gauge formed into deep, 1'' face channel shapes with a continuous vertical door strike integral with the frame on both sides of the door opening. Double, triple or four tier locker cross frame members shall be 16 gauge channel shaped securely welded to vertical framing members to ensure a square and rigid assembly. 2.3.5 DOORS: Doors shall be 16 gauge or 18 gauge steel for short or narrow doors as required by manufacturer's design, formed with a full channel shape on lock side to fully conceal the lock bar, channel formation on the hinge side and right angle formation across the top and bottom. Single tier doors 60'' and 72'' in height and 18'' and wider shall have a diagonal reinforcing angle welded to the inner surface. Ventilation consists of full perimeter opening. 2.3.6 PRE-LOCKING DEVICE: All "tiered" lockers shall be equipped with a positive automatic pre-locking type, whereby the locker may be locked while door is open and then closed without unlocking and without damaging locking mechanism. 2.3.7 LATCHING: Latching shall be one-piece, pre-lubricated, spring steel latch completely contained within the lock bar under tension to provide rattle-free operation. The lock bar shall be securely contained in the door channel by self-lubricating polyethylene guides that isolate the lock bar from metal-to-metal contact with the door. There shall be three latching points for lockers over 42" in height and two latching points for all tiered lockers 42" and under in height. The lock bar travel is limited by contacting resilient elastomeric cushioning devices located inside the lock bar. Frame hooks to accept latching shall be of heavy gauge steel, set close in and welded to the frame. Continuous vertical door strike shall protect frame hooks from door slam damage. The impact caused by the door closing shall be absorbed by a soft rubber silencer which is to be securely installed on each frame hook. 2.3.8 HANDLES: A non-protruding 14 gauge lifting trigger and slide plate shall transfer the lifting force for actuating the lock bar when opening the door. The exposed portion of the lifting trigger shall be encased in a molded ABS thermoplastic cover that provides isolation from metal-to-metal contact and be contained in a formed 20 gauge stainless steel recessed pocket. This stainless steel pocket shall contain a recessed area for the various lock types available and a mounting area for the number plate. 2.3.9 HINGES: Hinges shall be 2'' high, 5-knuckle, full loop, tight pin style, securely welded to frame and double riveted to the inside of the door flange. Locker doors 42'' high and less shall have two hinges. Doors over 42'' high shall have three hinges. 2.3.10 BODY: The body of the locker shall consist of 24 gauge upright sheets, backs, tops, bottoms and shelves. Tops, bottoms and shelves shall be flanged on all four sides; backs are flanged on two sides. Uprights shall be offset at the front and flanged at the rear to provide a double lapped rear corner. 2.3.11 INTERIOR EQUIPMENT: Single-tier lockers over 42" high shall have one hat/book shelf. Other tiered lockers do not require shelves. All single, double and triple tier lockers shall have one double prong back hook (single prong in 9" width) and two single prong wall hooks in each compartment. All hooks shall be made of steel, formed with ball points, zinc-plated and attached with two bolts or rivets. Lockers under 20" high are not equipped with hooks. 2.3.12 NUMBER PLATES: Each locker shall have a polished aluminum number plate with black numerals not less than 1/2'' high. Plates shall be attached with rivets to the lower surface within the recessed handle pocket. 2.3.13 COLOR: Doors and exposed body parts shall be finished in colors selected from Republic's collection of twenty-five colors. Non-exposed body parts shall be finished in #83 Decorator Tan. -Option: Specifier may modify above paragraph if non-standard custom colors are selected 2.3.14 ASSEMBLY: Assembly of all locker components shall be accomplished by the use of zinc plated, low round head, slotless, fin neck machine screws with hex nuts, producing a strong mechanical connection. -Option: Keps nut and bolts, or rivets may be used for assembly. PART 3- EXECUTION 3.1 INSTALLATION: Lockers must be installed in accordance with manufacturer's approved drawings. Installation to be level and plumb with flush surfaces and rigid attachment to anchoring surfaces. Space fasteners at 36'' O.C. or less as recommended by manufacturer. Use fasteners appropriate to load and anchoring substratum. Use reinforcing plates to be used wherever fasteners could distort metal. Various trim accessories where shown, such as sloping tops, fillers, bases, recess trim, etc., shall be installed using concealed fasteners. Flush, hairline joints shall be provided at all abutting trim parts and at adjoining surfaces. 3.2 ADJUSTMENT: Upon completion of installation, inspect lockers and adjust as necessary for proper door and locking mechanism operation. Touch up scratches and abrasions with factory supplied paint to match original finish. 3.3 QUALITY ASSURANCE: Republic reserves the right to modify the design and/or change specifications or colors/finish consistent with our policy of product excellence. NOTE: For use safety all Republic lockers must be secured to the wall and/or floor prior to use.